EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Floor Standing Racks
Floor Standing Racks
Leading Manufacturer of softline floor standing rack, floor standing racks, table racks with customized hinged side covers, floor standing customized racks, floor standing customized racks ( pt 11 series ) and customized 19 inch floor standing racks from Pune.
Softline Floor Standing Rack
Get Latest Price
Product Brochure
Softline Floor Standing Rack is ideally suited for mobile vehicles and places where mobility of people is more. Offered product is high in demand as these are in accordance to the standards as well as manufactured using supreme quality materials supplied by our vendors. Our reputed clients can avail the product in wide assortment and affordable range so as to meet the growing demand of our clients.
Features:
Scope Of Supply:
Material And Finish:
Features:
- Customization available
- Fabricated out of pressure die cast corners
- Corner Coupling Member is a cold forged pressed item for high rigidity
Scope Of Supply:
- Basic Frame Structure with Corner Members in Aluminium
- Two Side Covers
- Top Cover and Bottom Cover with Legs
- 19" Subrack mounting arrangement on Front
Material And Finish:
- Extrusions are made of HE 30 hard alloy
- Corner Members can be made of Aluminium, S.S., M.S.
- Available in Standard colour options
Additional Information:
- Item Code: PT14
Get Best QuoteRequest A Callback
Floor Standing Racks
Get Latest Price
Product Brochure
Other Details:
Scope Of Supply:
Available:
Accessories:
Specifications:
- This rack has the doors and side covers concealed type
- Extrusions made of special hard alloy with double hollow section to give very good rigidity from all the three axes
- Cable entry at the top and bottom
- All the three axes members are directly coupled to each other to give a good rigidity
- PT 11 ( Mark I ) series is having Front and Rear module mounting members adjustable at any distance
- PT 11 ( Mark II ) series is having Front and Rear member at a Distance of 47.5 mm from front and Rear
- PT 11 ( Mark III ) series is having Front and Rear member at a Distance of 67.5 mm from front and Rear
- Hybrid combination of Mark I, II and III can be at front and rear as per the customers' choice
- Load capacity 300 kgs
Scope Of Supply:
- Basic Frame Structure
- Two Side Covers
- Top Cover and Bottom Cover with Legs
- Rear door made if MS
- 19" Subrack mounting arrangement
Available:
- DA Grey / Munshell Grey
- Light Grey / Off white
- Black Blue
- Brown Beige
Accessories:
- Recess Kit -Consist of 4 vertical side and rear side members to house 19"
- subracks, 4 C channels and its mounting hardware
- Front Door in M.S. or Perspex
- Eye Bolts
- Caster Wheels with/without brake
- Ventilated Grills
- Resting Angles, Trays
- Cable Managers
- AC Power Distribution with 32 A MCB
- Drawers shell
Specifications:
| Summary of Standard Products With Standard Supply | ||||||||
| Floor Standing Rack | WALL MOUNT RACK | SOTLINE FLOOR STANDING | CARD RACK | INSTRUMENT RACK | ||||
| Mark I | Mark II | Mark III | ||||||
| Dimension | ||||||||
| Usable Height (Overall Height) | 12U (662mm) | 12U (662mm) | 12U (662mm ) | 12U (662mm ) | 12U (662mm) | 12U (629mm ) | 2U | 2U |
| 16U (840mm ) | 16 (840 mm ) | 16U (840mm) | 16U (840mm ) | 16U (840mm) | 16U (806mm) | 3U | 3U | |
| 20U (1017mm) | 20U (1017mm) | 20U (1017mm) | 20U (1017mm) | 20U (1017mm) | 20U (984mm) | 4U | 4U | |
| 32U (1640mm) | 32U (1640mm) | 32U (1640mm) | 32U (1640mm) | 32U (1518mm) | 5U | 5U | ||
| 42U (2085mm) | 42U (2085mm) | 42U (2085mm) | 42U (2085mm) | 42U (1962mm) | 6U | 6U | ||
Get Best QuoteRequest A Callback
Table Racks with Customized Hinged Side Covers
Get Latest Price
Product Details:
| Color | silver |
- PT 11 series - Table racks with customized hinged side covers, with or without Leg space.
- Ideal for comfortable working in sitting posture.
- Keyboard and mouse tray and enclosure for computer either tower type or
- 19 inch rack mountable.
- Can be made into various sizes.
Get Best QuoteRequest A Callback
Floor Standing Customized Racks
Get Latest Price
PT 11 series floor standing customized rack,
1500 mm deep, 42 U height with rugged wheels,
hinged side covers.
1500 mm deep, 42 U height with rugged wheels,
hinged side covers.
Get Best QuoteRequest A Callback
Floor Standing Customized Racks ( PT 11 Series )
Get Latest Price
PT 11 series floor standing customized rack,
1500 mm deep, 42 U height with rugged wheels,
hinged side covers.
1500 mm deep, 42 U height with rugged wheels,
hinged side covers.
Get Best QuoteRequest A Callback
Customized 19 inch Floor Standing Racks
Get Latest Price
Customized 19 inch floor standing racks with, a canopy protruding out of the 19 inch module mounting frame.Rugged design makes the canopy to take 150 Kg load, with Solid base frame.
With in-built LCD monitor fitting. Material of rack – Aluminium Alloy, Material for Canopy – M. Steel.
With in-built LCD monitor fitting. Material of rack – Aluminium Alloy, Material for Canopy – M. Steel.
Additional Information:
- Item Code: PT-14-Series
Get Best QuoteRequest A Callback
Carrying Handles
Get Latest Price
Carrying Handles offered in pair, Plastic handles used for Card Rack for carrying the rack from one place to other. We Offer a comprehensive range of Carry Handles which are used to eliminate the requirement of extra packaging material such as paper bags and plastic. The product is manufactured using quality material under the supervision of our skilled workers. These are appreciated for their quality, long service life and rigid construction feature.
Features:
Features:
- High grade nylon
- Rust free
- Fine finish
Get Best QuoteRequest A Callback
Shock Mounts Rubber with Metal Reinforcement
Get Latest Price
Shock Mounts Rubber with Metal Reinforcement is useful optional item for providing mobility to floor standing cabinets. Normally two castors with foot operated brakes and two without brakes are used. They are made of high grade nylon. Our professionals use the top quality of raw material, procured from reliable suppliers. These products are appreciated in the industry for their durability and nominal price range and quality for sure.
Features:
Features:
- High grade nylon
- Optimum performance
- Reliable quality
Get Best QuoteRequest A Callback
Front And Rear Panel Parts
Get Latest Price
We offer a wide range of Front & Rear Panels to our highly recognized clients. Front and rear panels are available for all standard models of card rack. These panels can be of Screw on type or hinged type. This product is manufactured at our unit using advanced technologies in accordance with set industry norms. Our esteemed vendors source the best material that is used by our professionals in processing the product.
Features:
Features:
- High strength
- Rust free
- High efficient
Get Best QuoteRequest A Callback
Electronics Ruggedised Rack
Get Latest Price
Ruggedized Rack with EMI/RFI protection is Purvatech Solutions specialty. Racks are manufactured as per the Customers Requirements, Specifications, Drawings. These Cabinets are subject to Tests as per JSS 55555 and ESS tests as per NAVAL standards. Many of our reputed customers have got certified for their testing centers. Electro Magnetic Compatibility By Purvatech Solution Ruggedised Racks. Electrical, magnetic and elector-magnetic fields are everywhere. Also around enclosures and equipment housings. Technical Systems can fall a prey to these electromagnetic environment, the devices themselves may produce electromagnetic fields in the course of their normal operation, leading similarly to interference or even damage or destruction in their vicinity. EMC is attainment of a defined interference immunity (protection against external interference fields) Prevention / reduction of emitted interference (protection for the environment against own interference fields). Many of the Purvatech Solutions racks, since made of Aluminum Extrusions offer electrical devices significant protection against electromagnetic interference fields.
An electro conductive connection is achieved between the outer surfaces of the enclosure by fitting a special conductive seal. The inner surfaces and the seal edges remain unpainted. Corrosion protection is provided by the aluminum-zinc coating of the base material. Sinusoidal Vibration Test with frequency sweep: The cabinet is mounted on its shock mounts. It is tested for the following vibration levels in all the three mutually perpendicular directions. The frequency is to be swept slowly at the rate of 1 octave per minute from 5 to 33 Hz with a constant displacement amplitude of +/- 0.125 mm. The total duration of the test is 10 hours. One hour endurance test at resonance frequency and if no resonance found one hour at 14, 23 & 33 Hz.
Shock Test:
The cabinet withstands following shock test after mounting on the test bench with shock mounts using 200 kg weight falling vertically from a height of 1.5 meters, two lateral blows with a weight of 200 kg at a radius of 1.5 meters falling through an angle of 60 degrees, two end blows with a weight of 200 kg at a radius of 1.5 meters falling through an angle of 60 degrees.
Drip Proof:
Mould Growth:
Salt Corrosion Test:
Bump Test:
Fire Retardant Painting:
An electro conductive connection is achieved between the outer surfaces of the enclosure by fitting a special conductive seal. The inner surfaces and the seal edges remain unpainted. Corrosion protection is provided by the aluminum-zinc coating of the base material. Sinusoidal Vibration Test with frequency sweep: The cabinet is mounted on its shock mounts. It is tested for the following vibration levels in all the three mutually perpendicular directions. The frequency is to be swept slowly at the rate of 1 octave per minute from 5 to 33 Hz with a constant displacement amplitude of +/- 0.125 mm. The total duration of the test is 10 hours. One hour endurance test at resonance frequency and if no resonance found one hour at 14, 23 & 33 Hz.
Shock Test:
The cabinet withstands following shock test after mounting on the test bench with shock mounts using 200 kg weight falling vertically from a height of 1.5 meters, two lateral blows with a weight of 200 kg at a radius of 1.5 meters falling through an angle of 60 degrees, two end blows with a weight of 200 kg at a radius of 1.5 meters falling through an angle of 60 degrees.
Drip Proof:
- Test is to be carried out in fully assembled cabinet for a period of 15 min a) by keeping in equipment in vertical position, b) by keeping an equipment at an angle of 15 degree to vertical.
Mould Growth:
- The sample component is introduced within 15 min of spraying into the chamber where working space is maintained at a temperature of 29 degrees C +/- 1 degree and a relative humidity of not less than 90% the sample is exposed in the chamber of 28 days.
Salt Corrosion Test:
- The rack is stored at a temperature of 35 degrees C +/- and relative humidity of 90% for a period of 7 days
Bump Test:
- 4000 bumps at 40g, 6 ms, done in packed conditions.
Fire Retardant Painting:
- Special painting with fire retardant paints is provided
- Responsibility of Testing lies with the Customer
Get Best QuoteRequest A Callback